run program at start-up and at shut-down

I had found this page very important to whom interest start-up services  and shut-down,

http://www.stuffaboutcode.com/2012/06/raspberry-pi-run-program-at-start-up.html


There are loads of ways of running a command at start-up in Linux but my favoured approach is to create an initialisation script in /etc/init.d and register it using update-rc.d. This way the application is started and stopped automatically when the system boots / shutdowns.

Create script in /etc/init.d

sudo nano /etc/init.d/NameOfYourScript

The following is an example based on starting up the no-ip service [/usr/local/bin/noip], but change the name of the script and the command to start and stop it and it would work for any command.

#! /bin/sh
# /etc/init.d/noip 

### BEGIN INIT INFO
# Provides:          noip
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Simple script to start a program at boot
# Description:       A simple script from www.stuffaboutcode.comwhich will start / stop a program a boot / shutdown.
### END INIT INFO

# If you want a command to always run, put it here

# Carry out specific functions when asked to by the system
case "$1" in
  start)
    echo "Starting noip"
    # run application you want to start
    /usr/local/bin/noip2
    ;;
  stop)
    echo "Stopping noip"
    # kill application you want to stop
    killall noip2
    ;;
  *)
    echo "Usage: /etc/init.d/noip {start|stop}"
    exit 1
    ;;
esac

exit 0

Warning - its important you test your script first and make sure it doesn't need a user to provide a response, press "y" or similar, because you may find it hangs the raspberry pi on boot waiting for a user (who's not there) to do something!

Make script executable

sudo chmod 755 /etc/init.d/NameOfYourScript

Test starting the program

sudo /etc/init.d/NameOfYourScript start

Test stopping the program

sudo /etc/init.d/NameOfYourScript stop

Register script to be run at start-up
To register your script to be run at start-up and shutdown, run the following command:

sudo update-rc.d NameOfYourScript defaults

Note - The header at the start is to make the script LSB compliant and provides details about the start up script and you should only need to change the name. If you want to know more about creating LSB scripts for managing services, see http://wiki.debian.org/LSBInitScripts

If you ever want to remove the script from start-up, run the following command:

sudo update-rc.d -f  NameOfYourScript remove

----------------------------------------------------------

so i done mine to test the RPi start up and Shut down

and here is the code 

also i faced a problem with DNS so i forced it to update it not to be overwrite from another script

here the included codes